HOW TO REPLACE THE BATTERY IN MY SPORTDOG® BRAND SPORTTRAINER® SD-575 HANDHELD REMOTE

Remove the screws from the back of the remote with a T8 star bit driver. Then remove the back cover. If you purchased a battery replacement kit from our website, a T8 star bit driver is provided in the kit.

Pinch the wires firmly between two fingers and carefully pull the battery’s wire plug straight out of the connector in the remote transmitter.

Plug the new battery into the connecter in the remote transmitter. Then place the battery inside the back of the remote transmitter.

Remove the rubber gasket from the battery cover.

Wipe out any dirt or debris that has built up.

Replace the gasket with the new gasket provided in your battery replacement kit.

This step is important for the remote to remain waterproof.

Put the front and back of the remote back together, and hand-tighten all 8 screws.

Be careful not to fasten the screws too tight as this can damage the remote.

Pair your remote transmitter and collar after replacing the battery. Please refer to HOW TO PAIR ONE COLLAR TO YOUR SPORTDOG® SPORTTRAINER® SD-575 or visit HOW TOADD AN ADDITIONAL DOG TO YOUR SPORTDOG® SPORTTRAINER® SD-575 to pair a second dog.