HOW TO CHANGE THE BATTERY IN MY SPORTDOG® HOUNDHUNTER® 3225 REMOTE
HOW TO CHANGE YOUR REMOTE'S BATTERY
Remove the screws from the back of the remote with a #1 Phillips screwdriver. Then remove the back cover.
- If you purchased a battery replacement kit from our website, a Phillips screwdriver is provided in the kit.
Pinch the battery’s wires next to the white connector and pull the battery’s wire plug out of the connector in the handheld.
- If it doesn’t initially come out, pull slightly harder.
Take the new battery’s wire plug and insert it into the connecter in the handheld. Then place the battery inside the back of the handheld.
Remove the rubber gasket from the battery cover. You can do this with a paperclip or something similar.
- You may need to wipe out any dirt or debris that has built up.
Replace the gasket with the new gasket provided in your battery replacement kit.
- This step is important for the remote to remain waterproof.
Put the front and back of the remote back together, and hand tighten all 8 screws.
- Be careful not to fasten the screws too tight as this can damage the handheld.
You will need to pair your handheld and collar after replacing the battery. Please refer to HOW TO PAIR MY SPORTDOG® HOUNDHUNTER® 3225 REMOTE TRANSMITTER WITH A SINGLE COLLAR or if you have more than one collar to pair- HOW TO ADD ANOTHER COLLAR RECEIVER TO MY SPORTDOG® HOUNDHUNTER® 3225.
CONTACT CUSTOMER CARE
If you need further assistance, please contact our customer care team.