HOW TO ADD ANOTHER COLLAR RECEIVER TO MY SPORTDOG® HOUNDHUNTER® 3225
Before beginning the pairing process, you will need to program the remote transmitter to the correct mode. Modes allow you to change the function of the buttons.
- To learn more about each mode, visit our article MODES EXPLAINED. To learn how to change modes, visit HOW TO CHANGE MODES.
PAIR UP TO 2 DOGS
To pair 2 collars, you need to be in Mode 1 or 2.
Make sure that the remote’s toggle switch is in the up position for the first collar.
Grab the first collar you want to be paired. Ensure the collar receiver is off by confirming there are no lights after 10 seconds.
Press and hold the power button on the collar receiver. The Indicator Light will turn green. Continue to hold until the light goes out, then release the power button.
Press and hold the upper button with the bump on the remote transmitter until you see the collar Indicator Light flash green 5 times. Your remote transmitter and collar are now paired.
Put your toggle switch in the down position.
Repeat steps 2-4 with the second collar.
The colored arrows on the remote do not need to match the collar strap. The arrows are only present in the event you wish to color-code your collars.
PAIR UP TO 3 DOGS
To pair up to 3 collars, you need to be in Mode 3 or 4.
Make sure that the remote’s toggle switch is in the up position.
Grab the first collar you want to be paired. Ensure the collar receiver is off by confirming there are no lights after 10 seconds.
Press and hold the power button on the collar receiver. The Indicator Light will turn green. Continue to hold until the light goes out, then release the power button.
Press and hold the button on the remote transmitter that you want to correspond with that collar until you see the collar Indicator Light flash green 5 times. The collar is now paired.
Repeat these steps for the additional collars. Be sure to pair each collar to a separate button on the remote transmitter.
The colored arrows on the remote do not need to match the collar strap. The arrows are only present in the event you wish to color-code your collars.
PAIR UP TO 6 DOGS
To pair up to 6 collars, you need to be in Mode 5 or 6.
Make sure that the remote’s toggle switch is in the up position.
Grab the first collar you want to be paired. Ensure the collar receiver is off by confirming there are no lights after 10 seconds.
Press and hold the power button on the collar receiver. The Indicator Light will turn green. Continue to hold until the light goes out, then release the power button.
Press and hold the button on the remote transmitter that you want to correspond with that collar until you see the collar Indicator Light flash green 5 times. The collar is now paired.
Repeat these steps for collars 2 and 3. Be sure to pair each collar to a separate button on the remote transmitter.
Flip your toggle switch down.
Repeat steps 2-5, for your remaining collars.
CONTACT CUSTOMER CARE
If you need further assistance, please contact our customer care team.