HOW TO ADD ADDITIONAL COLLARS OR BEEPERS TO MY SPORTDOG® UPLANDHUNTER® 1875
TO PAIR 2 DOGS
Make sure that the remote’s toggle switch is in the up position for the first collar.
Ensure the first collar and beeper are off by confirming there are no lights after 10 seconds
Press and hold the power button on the collar and beeper. The Indicator Light will turn green. Continue to hold until the light goes out, then release the power button.
Press and hold the upper button with the bump on the remote until you see the collar and beeper Indicator Lights flash green 5 times. Your units are now paired.
Put your toggle switch in the down position.
Repeat steps 2-4 with the second collar and beeper.
TO PAIR MORE THAN 2 DOGS
When pairing more than two dogs, you will first need to program the remote transmitter to one of the modes listed below. Modes allow you to change the function of the buttons.
- If you have 3 collars to pair, you can use the following modes:
- You can choose Mode 5 UP if you want the ability to tone your dogs.
- You can choose Mode 5 DOWN if you want the ability to vibrate your dogs.
- To learn more about each mode, visit our article MODES EXPLAINED.
- To learn how to change modes, visit HOW TO CHANGE MODES.
Make sure that the remote’s toggle switch is in the up position.
Grab the first collar and beeper you want to be paired. Ensure the collar and beeper is off by confirming there are no lights after 10 seconds.
Press and hold the power button on the collar and beeper. The Indicator Lights will turn green. Continue to hold until the light goes out, then release the power button.
Press and hold the button on the remote that you want to correspond with that collar and beeper until you see the collar Indicator Light flash green 5 times. The units are now paired.
Repeat these steps for the additional collars and beepers. Be sure to pair each collar/beeper to a separate button on the remote.